Nowadays there are various types of pattal-dona or paper plate-bowl automatic machines available in the market. But it's an automated machine that you can call a complete automatic machine. Because on all machines you have to take 2-3 labour
for counting and packing of finished product, as well as during the production of the pattal-dona or paper plate-bowl, the wastage and the product are mixed together, which we have to differentiate. Now we will give you our new product in which the waste and production are dropped at different places, and with the help of digital counting meter, we do not need to count the pattal-dona or paper plate-bowl only one person is adequate to pack directly. With JDI-05 you can set the temperature of dye according to your wishes. The digital meter shows the temperature of your dye in degrees Celsius and the temperature of the thermometer diode on the dyes is very helpful in measuring the degree Celsius. As soon as the temperature of the machine's diode starts moving from the prescribed stage, the heater is cut out or when the temperature decreases from the determined stage, the heater is automatically turned on, i.e., there is no need to decrease or increase the temperature frequently like other machines. You have a good idea that the dye of our machine has become hot and the machine is fully prepared for production. Due to this, your goods are not prone to getting burnt due to high temperature or excessive heat or , not getting desired product due to less temperature or low heat and also controls the amount of wastage due to these reasons! Due to the digital meter and the thermometer, you can set the temperature of the paper according to your liking, which saves you from increasing or decreasing the temperature again abd again. The unaware person who does not have the right knowledge of production can also use this machine, production can easily be done with this machine. The temperature table available helps you to get the correct output. We do not know at the beginning how much temperature is suitable for which paper , which leads to the exploitation of our goods, also electricity is saved if the heater is not needed. There are many features of this machine, in which there is a specialty that due to the high power heater being installed in the machine, very little time is estimated to be fully heated within 30 to 35 minutes, as much as we need the temperature, after which the cut out happens, that means the heater is turns off! Normal machines take 1 to 1.25 hours to heat! The machine has high speed, strength is unmatched and low maintenance and more work efficiency. Contact the office to see the demo of the machine.